EverTrendEssentials
K1RC 1.47 Inch Analog Dashboard Connected Cockpit for 1/10 RC Crawler Drift Car TRX4 Defender AXIAL SCX10 1/14 Tamiya Truck DIY
K1RC 1.47 Inch Analog Dashboard Connected Cockpit for 1/10 RC Crawler Drift Car TRX4 Defender AXIAL SCX10 1/14 Tamiya Truck DIY
Regular price
$83.99 USD
Regular price
$115.99 USD
Sale price
$83.99 USD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
SPECIFICATIONS
Brand Name: NoEnName_Null
For Vehicle Type: Cars
Four-wheel Drive Attributes: Shell/Chassis/Wing/Head
High-concerned chemical: None
Is Batteries Included: No
Is Electric: No Battery
Is it battery/power supply: N
Is it charger/adapter: N
Material: Plastic
Model Number: RC Crawler Car
Origin: Mainland China
Plastic Type: ABS
Quantity: 1 pcs
RC Parts & Accs: dash board
Recommend Age: 14+y
Remote Control Peripherals/Devices: RECEIVERS
Size: 1.47 inches
Upgrade Parts/Accessories: Car Shell
Use: Vehicles & Remote Control Toys
K1RC 1.47 Inch Analog Dashboard Connected Cockpit for 1/10 RC Crawler Drift Car TRX4 Defender AXIAL SCX10 1/14 Tamiya Truck DIY
RC climbing car, remote control car, RC tractor simulated cockpit linked instrument panel, which can link the throttle and steering.
In order to synchronize the turn signal and the instrument panel, the left and right turn signal functions are added correspondingly.
RC climbing car, remote control car, RC tractor simulated cockpit linked instrument panel, which can link the throttle and steering.
In order to synchronize the turn signal and the instrument panel, the left and right turn signal functions are added correspondingly.
Material:Plastic
Quantity:1set
Size:1.47inch
Color:As shown in the picture
Suitable for:1/10 RC Crawler Drift Car 1/14 Tamiya RC Truck /Remote control model cars, etc.
Quantity:1set
Size:1.47inch
Color:As shown in the picture
Suitable for:1/10 RC Crawler Drift Car 1/14 Tamiya RC Truck /Remote control model cars, etc.
Note: A minimum of 4 channels or more is required for the receiver to work properly. All 4 channels must be connected to the receiver to work properly. For example, the wiring method is: use a Y line at the receiver end, one end is connected to the steering servo, and the other is connected to the instrument. The disk module can be linked.
--The delivery is as shown in the SKU picture (pin header is included, but the pin header is not soldered, you need to solder it yourself as needed)
--There are two modes, 1. Normal mode 2. Speed measurement mode. See Figure 4 below for details. Default normal mode
--This module does not support left and right fine-tuning. If your rudder is calibrated through fine-tuning, there will be more rudder on one side, causing the turn signal on one side to keep flashing. Therefore, in the direction part, it is recommended to manually adjust the servo to a straight state.
--Supports 2~4S voltage detection, allowing you to intuitively see the remaining power of the vehicle battery. The throttle pointer can automatically display the highest and lowest power status based on the current few seconds of power.
--The delivery is as shown in the SKU picture (pin header is included, but the pin header is not soldered, you need to solder it yourself as needed)
--There are two modes, 1. Normal mode 2. Speed measurement mode. See Figure 4 below for details. Default normal mode
--This module does not support left and right fine-tuning. If your rudder is calibrated through fine-tuning, there will be more rudder on one side, causing the turn signal on one side to keep flashing. Therefore, in the direction part, it is recommended to manually adjust the servo to a straight state.
--Supports 2~4S voltage detection, allowing you to intuitively see the remaining power of the vehicle battery. The throttle pointer can automatically display the highest and lowest power status based on the current few seconds of power.
K1RC 1.47 Inch Analog Dashboard Connected Cockpit for 1/10 RC Crawler Drift Car TRX4 Defender AXIAL SCX10 1/14 Tamiya Truck DIY
